MDF · 01 KL Packaging

The Field Guide Guide

Amazon Commingling Ended March 31, 2026: What Resellers Have to Label Now

Amazon stopped commingling FBA inventory on March 31, 2026. What commingling was, what changed, who has to put an FNSKU on every unit, how the Brand Representative exemption works, and what to do if your shipments are still getting flagged.

ChecklistFrom this piece
  1. Switch each reseller SKU to Amazon barcode
  2. Do not worry about losing reviews
  3. Label every unit to spec
  4. Check your Inbound Performance Dashboard

Excerpt. The full list is in the piece below.

Leaves: Checklist

On March 31, 2026, Amazon stopped commingling FBA inventory. Since then, every unit a customer receives comes from the seller they bought from, and every reseller has to put an Amazon barcode (an FNSKU label) on every unit it sends in (Amazon Seller Central: FBA Barcode Choice and Labeling FAQ).

Amazon announced the change on the Seller Forums in late 2025 (Amazon Seller Forums: “Commingling practices will end effective March 31, 2026”). This page covers who the rule applies to, who is exempt, and what to do, using Amazon’s own wording.

What is commingling on Amazon?

Commingling was Amazon filling an order with an identical product from the nearest fulfillment center, even if that unit belonged to a different seller. Units with the same manufacturer barcode were treated as interchangeable. Amazon describes it as using “exact product matches from the closest available inventory” to deliver faster (FAQ).

In practice, commingling is why sellers could send units in with only the manufacturer UPC. It is also why a seller could be blamed for a unit another seller sent in.

Does Amazon comingle products?

Not anymore. Amazon ended commingling on March 31, 2026. Customers now receive products only from the inventory of the seller they bought from, and that includes returns and removals. Stickerless inventory already stored in or on its way to a fulfillment center before that date was allowed to keep selling under its original SKU (FAQ).

Why did Amazon end commingling?

Amazon’s stated reason is delivery speed, not counterfeits. Commingling existed to fill orders from the closest unit, and Amazon says sellers now keep enough of their own stock near customers that pooling is no longer needed. Its announcement says that “now that most sellers maintain inventory levels that keep products close to customers, we can achieve fast delivery without commingling” (Seller Forums announcement).

For resellers, the FAQ explains the labeling requirement differently. Brand owners buy their barcodes from GS1 and are directly responsible for their products. Everyone else needs an Amazon barcode so Amazon can attribute and track their units separately (FAQ).

Did ending commingling fix the counterfeit problem?

Amazon has not said so, and does not frame the change as an anti-counterfeit measure. What changed is attribution: a customer now receives the unit from the seller they bought from, so a fake or damaged unit traces back to the seller who sent it in, not to whoever else sold the same UPC.

The long-running complaint about commingling was that a counterfeit, expired, or damaged unit sent in by one seller could be shipped to a customer who bought from someone else, and the review landed on the wrong seller and the brand (PPC Land).

Who is affected by the end of commingling?

Every FBA seller who is not the Brand Representative for the brand they sell. That includes authorized resellers, wholesale sellers, arbitrage sellers, and sellers enrolled in Brand Registry under a role other than Brand Representative. All of them must apply FNSKU labels to every unit, even when the product already has a UPC (FAQ).

Amazon’s FAQ answers the authorized-reseller question directly: “No. As of March 31, 2026, all resellers, including authorized resellers, must use Amazon barcodes when sending inventory to our fulfillment centers.”

Products with no manufacturer barcode need FNSKU labels no matter who sells them, brand owner included (FAQ).

Who is exempt? The Brand Representative rule

The exemption belongs to the Brand Representative role in Amazon Brand Registry, not to Brand Registry enrollment in general. A product can skip FNSKU labels only if it is in new condition, has a single scannable UPC, EAN, or ISBN that matches one ASIN, and belongs to a brand where you are the Brand Representative. GTIN-exempt products still need labels (FAQ).

Two details catch brand owners out:

  • Products must be registered to your brand. Enrolling the brand does not connect your products automatically. If Seller Central will not let you choose the manufacturer barcode, check that each product is registered to your brand (Seller Central: Use manufacturer barcodes for FBA).
  • GTIN exemptions do not qualify. If you listed without a UPC under a GTIN exemption, you still label with FNSKUs (FAQ).

For Brand Representatives the change is mostly good news. Amazon points out that you no longer need to pre-allocate units to Amazon or other channels, because the same UPC-labeled stock can go anywhere (Seller Forums announcement). If you have been paying someone to put FNSKU labels on products that qualify, you can stop.

What happens if a reseller ships without FNSKU labels?

Amazon treats the units as defective. It says it will attempt to fix the labeling, report the defect on your Inbound Performance Dashboard, and that improperly labeled units are not eligible for reimbursement. Amazon has not described this as rejecting the shipment, but the defects count against you and the reimbursement loss is real (FAQ).

Amazon’s broader FBA rules also allow it to refuse inventory, block future shipments, or charge for noncompliance when prep and labeling requirements are not met (Seller Central: FBA product restrictions). And Amazon no longer labels units for you as a paid service: that ended for US shipments created on or after January 1, 2026 (Seller Central: FBA Prep Service).

What resellers should do now

  1. Switch each reseller SKU to Amazon barcode. For an existing ASIN, that means creating a new SKU with Amazon barcode selected as the barcode type. Seller Central flags SKUs that are no longer eligible when you create a shipment (Seller Central: Create a new SKU to switch to Amazon barcode).
  2. Do not worry about losing reviews. Amazon says ratings and reviews are measured at the ASIN level, so a new SKU does not reset them (FAQ).
  3. Label every unit to spec. 1 x 2 to 2 x 3 inch labels, cover the UPC, keep the label off curves. Our FNSKU label guide has the full spec.
  4. Check your Inbound Performance Dashboard. If units are being flagged as missing a barcode or mislabeled, fix the cause before the next shipment.
  5. Price the labor in. Labeling every unit is a real cost per unit for resellers who used to ship stickerless. Put it in your margin math before you reorder.

Is FBA still profitable in 2026?

It can be, but the margin math changed. Resellers now pay to label every unit, Amazon no longer prep-services shipments, and Amazon adjusted several 2026 FBA fees, including fulfillment, low-inventory-level, and inbound placement fees. Rerun your numbers per SKU with current fees before you reorder (Seller Central: 2026 US Referral and FBA fee changes summary).

A few 2026 changes from that summary that touch resellers directly:

  • Low-inventory-level fees apply at the FNSKU level instead of the parent ASIN. Amazon says it is waiving FNSKU-level low-inventory-level fees for affected ASINs while resellers transition from stickerless inventory (FAQ).
  • Inbound placement service fees for standard-size products rose by $0.05 per unit on average when using the minimal splits option.
  • Removal and disposal fees for standard-size aged items under 0.5 lb dropped by $0.20 per unit. The lightest standard-size removal tier is now $0.84 per unit (Seller Central: FBA removal order fees).

We cannot tell you whether your account is profitable. We can tell you what labeling and prep will cost per unit.

If you want the labeling handled

We print and apply FNSKU labels from your Seller Central shipment plan, cover the manufacturer barcodes, and pack to Amazon’s spec in Medford, Oregon. If you are the Brand Representative and your products qualify for manufacturer barcodes, we will tell you that instead of billing you for labels you do not need.

See the FBA prep service, our starting rates (confirmed in your written quote), or estimate a shipment with the FBA prep cost calculator. Call (541) 531-8797 or send us your SKU list.

Sources on commingling

All Seller Central pages are US help pages. Accessed October 22, 2026.

Last updated: October 22, 2026

Trevor Lee

Owner, KL Packaging · Medford, Oregon

Trevor owns KL Packaging in Medford, Oregon. Questions about anything in this piece go straight to him.

Trevor’s profile Ask a question

Next step

Questions about labeling after commingling? Ask Trevor.

A written quote from the owner, not a sales rep. We aim to reply within one business day. If we are not the right shop for what you need, Trevor will tell you that too.

Your paper trail

  1. 01Checklist
  2. 02Written quote
  3. 03Reading list

What comes back

  • A reply from Trevor about labeling after commingling
  • A written quote if you want one
  • Calendar link or a one-page reply
Reviewed by
Trevor Lee, owner
Reply
We aim to reply within one business day.
How you reach us
Direct email + cell